Gunsmithing

Custom Work

Custom Work and Machining Hourly – $100 per hour

Fitting Rifle Action to New Stock – $320

Recoil Pad Custom Fitted to Stock – $120

Drill & Tap for New Scope Mounting – $120

History Check/Verification Documentation – $120

Insurance Quotes – $45 per gun

Insurance Repair Hourly – $90

RIFLES

Complete Clean, disassemble, safety check, oil and reassemble

Bolt Actions, Pumps, Autos & Levers $65.00-hr

RIMFIRES CLEANING $25.00-$45.00

Barrel removal $75.00

New Barrel install head spaced, chambered and ready to shoot $320.00 (turnaround time is about 1-3 months)

I am a dealer for Krieger Barrels, Hart Barrels, Criterion Barrels, Shilen Barrels. Discount if you purchase barrel from me and will save you in the long run any way because I am a dealer for all those companys.

Install and mount scope $50.00 (free professional bore sighting made by Sightmark)

Zero in rifle at range, ammo not included $60.00

Trigger jobs start at $50.00 hr

Check headspace $25.00

Lap barrel $60.00

Lap Bolt $55.00

Cut and crown average barrel $40.00

Recrown only $30.00

Install new bolt handle, (handle not included) starts at $125.00

Inlet new bolt handle to stock and receiver $40.00

Checker bolt handle (per panel) $95.00

Drill and tap rifle receivers for scope mounts $45.00

Drill and tap for open sights front & rear $65.00

Drill and tap hard receivers (Springfield, Enfield, Savage 99, Ruger Mini 14) $65.00

Drill and tap for side mounts (starting at) $45.00

Drill and tap for peep sights $40.00

Inlet stock for peep sights or side mounts $40.00

Jewel bolt $75.00

Jewel extractor $40.00

Jewel follower $45.00

Zero in rifle at range, ammo not included $60.00

Glass bed finished rifle $85.00 – 150.00 depending on how much material is needed

Dovetail .22 rifle for tip-off rings $60.00

Dovetail for open sights (per cut) $35.00

Dovetail front and rear same set up $60.00

Trigger work on request (starting price) $50.00-hr (most range 50.00-100.00)

Parkerizing, Bluing, Cerakote Coatings –all depends on size and what you want done.

M1 Garand

Complete restoration with new wood Parkerizing and check and replace any (if any) worn out parts. $799.00 CMP approved

Trigger Jobs $ 60.00 CMP approved

Parts call for specific parts.

Parkerizing $275 best Parkerizing job you will ever see

AR15-AR10

Sight in Iron Sights – $45

Reduce Barrel Diameter to lighten – $160

Build Complete Upper – $65.00 (Not Including Parts)

Build Complete Lower – $45.00 (Not Including Parts)

Build Complete Rifle – $100.00  (Not Including Parts)

Install Muzzle Device – $10.00

Changing barrels $35.00

Changing handguards $15.00-$30.00

Cleaning complete $35.00- $50.00

 

Handguns

 

Complete Clean, disassemble, safety check, oil, and reassemble $50.00

Semi-auto pistol action job: Clean & smooth action, not including any parts $120.00

Trigger jobs $50.00-$100.00

 

REVOLVER WORK

Complete Clean, disassemble, safety check, oil, and reassemble

$50.00 Drill & Tap for scope mounts $45.00

Revolver action job / clean and smooth action(spring kits and parts additional) $75.00

Rebarrel most revolvers, includes: remove old barrel, install factory barrel, labor only $100.00

Install colored front sight insert $40.00

Remove or modify hammer spur $45.00

Convert square butt frame to round butt (bluing additional) $80.00

Chamfer barrel throat $40.00

Chamfer cylinder chambers $40.00

 

AUTO WORK

Complete Clean, disassemble, safety check, oil, and reassemble $50.00

Semi-auto pistol action job: Clean & smooth action, not including any parts $120.00

Glock

Custom Glock slide work performed on customer provided slides as well as our new stainless steel slides. Sides can be cut to increase performance and functionality. Many options from front cocking serrations to various forms of lightening cuts to increase slide speed so the gun can fire mechanically faster and reduce muzzle flip. A lighter slide when sprung properly will have less reciprocating weight and will recoil softer.

 

Cerakote Spray on ceramic coating available in a number of colors. Of the spray on – bake on coating this is the one we have found to be the best. It is the most durable at about 65 Rockwell hardness and only adds 2.5 mils in thickness. This is our recommendation for coating polymer Glock frames and for digital camo patterns.

Slides (all coatings) $150

Barrels (DLC only) $75

Frames (Cerakote only) $150

Other parts please call for quote.

Slide Cut Options

Cut Slide for Micro Red Dot Sight $185

Cut slide for Bomar Style iron sight $185

Cut for Slide Racker (includes Slide Racker) $160

45 Degree Radius Cuts along top of the slide (both right and left side) $80

Ball End-mill Radius Cut (both right and left side) $80 – 110

30 degree radius cuts on muzzle (All models except sub compact and Glock 34, &35) $80

Bomar Style Rear Slide Cut Flush (Sight not included) $185

Red Dot Sight Cut (Doctor/Fastfire, Jpoint/Deltapoint, Trijicon RMR,  or Cmore STS) $195

Slide Racker cut (includes slide racker) $170

Top Lightening Window ($40 – $75 depending on size, and gun model)

Large Side Windows ($75/pair)

All of our Signature Cuts for Glock slides and our slides $300

Custom grip jobs performed on your Glock frame. Each grip is shaped to customers hand or specifications. A grip that is properly fitted to your hand will point and index intuitively thus improving your shooting. Grip angles can be corrected to reduce limp wristing, or improve accuracy of point shooting. Grip girth can be reduced so shooters with smaller hands can work the magazine release or slide release lever without shifting their grip. Alternatively shooters with larger hands can have grip enlarged so they have proper trigger finger placement.

A number of textures are available for competition shooting, CCW, or general range use. Go with an aggressive texture such as standard stipple or Silicone Carbide for recoil management and sure grip even with sweaty hands. For CCW we recommend our CCW Stipple. The CCW Stipple has the same appearance as the Standard Stipple but the high spots on the right and left pannel are removed so it does not scratch skin or print on clothing. The front and back strap are left aggressive for a sure grip.

For speedy turnaround time, please contact us to make arrangements to send your frame in and to discuss your options.

Standard Grip Package (Our most popular configuration) $165:

Reduce angle of backstrap

Reduce girth of grip

Single or double undercut trigger guard

360 texture grip in  Silicone Carbide, Standard Stipple, or CCW Stipple

Remove or reduce finger grooves

Grip Options:

Build up grip for proper finger placement for shooters with large hands ($40 – $80 depending on size)

Texture Magazine basepad ($50 per basepad)

Round Trigger Guard ($30 w/ Standard Grip Package – $50 by itself)

Internal Ramp ($110 with Standard Grip package – $130 without)

Flattened 1911 angle backstrap only with internal ramped grips. (+$85 w/ Standard Grip Package)

Add Beavertail ($120 with Standard Grip Package – $120 without)

Single or Double Undercut trigger guard $50

Shorten Grip for Compact or Sub Compact Mags $90

1911

Semi-auto pistol action job: Clean & smooth action, not including any parts $120.00

Tighten slide on 1911 style $80.00

Fit barrel to 1911 style: Non-ramped barrel $80.00

Ramped barrel $120.00

Fit and install barrel bushing on 1911, does not include cost of bushing $40.00

Checker front strap of 1911 style frame:20 lines per inch30 lines per inch $200.00$225.00

Lower and flare ejection port (bluing additional) $50.00

Polish barrel and feed ramp $50.00

Fit custom trigger, does not include cost of trigger $35.00

Fit custom hammer, does not include cost of hammer $70.00

Mill slide for low profile rear sight $100.00

Mill slide for front dovetail sight $50.00

Install stake on front sight, does not include sight $30.00

Install extended magazine release, does not include mag release $25.00

Modify frame for beavertail grip safety, does not include safety

Cut, crown and reset bead (New Bead additional) $65.00

Cut and crown O/U or SxS $85.00

Drill and tap for sight bead (one) $20.00

Drill and tap for sight beads (two, same set up) $30.00

Install rifle sights on plain barrel (includes Remington sights and matte bluing) $175.00

Drill and tap for top mounts $45.00

Drill and tap for side mount (starting at) $45.00

 

$100 General Gunsmith Services

$80.00 Hourly Rate

$15.00 Install Bead

$30.00 Drill and Tap

 

 

1911 Specific Services

Trigger Job – $120

Bobtail Main Spring – $160

Install Ambi Safety – $45

Replace Ejector – $45

Fit New Barrel/Bushing – $120

Replace Extractor – $45

Fit Beavertail Safety – $80

Fit Hammer – $45

Fit Trigger – $45

Lower Ejection Port – $120

Custom Work and Machining Hourly – $100 per hour

Fitting Rifle Action to New Stock – $320

Recoil Pad Custom Fitted to Stock – $120

Drill & Tap for New Scope Mounting – $120

History Check/Verification Documentation – $120

Insurance Quotes – $45 per gun

Insurance Repair Hourly – $90

Shotguns

We can help make your dreams come true. Ask us what you want done and we will help